Lithonia Lighting OLB F 8 30K DDB M6 Bullet LED 3000K Floodlight, Black Bronze

The Lithonia Lighting Outdoor LED Bullet Flood Light provides flood lighting and can be mounted to a stem or junction box. Lithonia Lighting LED fixture is the ideal LED product for multi family, commercial, retail and home environments. Provides 592 lumens while using 10.5 watts in a water resistant fixture that is designed to replace 90 100 Watt halogen fixtures. Which Version Do I Need? Flood light version OLBF is meant to spread light over a wider space, like a wall or large tree Spot light version OLBS will shine light on a much smaller area. Can illuminate a 2 x 2 area from up to 50 feet away Technical Specifications: Power: 10.5W Input Voltage: 120V Connects directly to power supply via provided UL recognized driver Luminous Flux: 592 LM Emitting Color: 3000K Bright White Dimmable: NO Light Source: LED CRI: 84 Average life: 100,000 hours Warranty: 5 years Limited Electrical: Long life LEDs, coupled with a high efficiency driver, provide extended service life. Meets Highest Industry Standards: UL certified in the USA and Canada, Wet Listed, IP 65 Rated for outdoor protection More electrical information is located on the spec sheet Replaces: Up to a 100 watt halogen flood light fixture Application Areas: Ideal fixture when you need to illuminate signs, walls, trees, entrance ways, outdoor artwork, pathways, landscaping, stairwells and more Which light colors work for me? 3000K: Used in family homes, hotels, coffee shops and other warm and sweet environments. 5000K: Used in offices, working areas, shopping malls and other commercial areas that needs super bright lighting INSTALLATION: 1. ALWAYS TURN OFF CIRCUIT BREAKER BOX BEFORE STARTING ANY INSTALLATION 2. Remove fixture components and parts pack. Check that all parts are included. For Junction Box Mounting: 3. Secure the LED Light Fixture 1 to a proper junction box cover with 1/2 14 NPT with internal threads not provided 4. Connect bare copper wire from fixture to ground wire from power supply and secure with Wire nut 3 . Connect black fixture wire to black supply wire and white fixture wire to white supply wire with Wire nuts 3 5. Properly secure junction box cover to junction box. For Stem Mounting: 3.Connect bare copper wire from fixture to ground wire from power supply and secure with Wire nut 3 . Connect black fixture wire to black supply wire and white fixture wire to white supply wire with Wire nuts 3 4. Position wires inside pipe then thread LED Light Fixture 1 onto stem 5. Loosen Allen Head Screw 4 adjust fixture to desired position then tighten screw.