Product OverviewThe ES-50X is the latest intelligent addressable fire alarm control panel (FACP) from FireLite Alarms and is a direct replacement for the MS-9050UD/LS. The ES-50X comes with a pre-installed communi-cator and supports up to 50 addressable devices in any combination of detectors or modules. With an extensive list of powerful features, the ES-50X programs just like FireLite's other addressable panels, yet fits into applications previously served only by conventional panels.The pre-installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator's internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL.Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel's USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system voltages by means of a USB flash drive.The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polarity/city box transmitter (4XTMF).FeaturesListed to UL Standard 864, 10th editionPre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station CommunicatorOptional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet?Compatible with SWIFT? wireless devicesAuto-programming (learn mode) reduces installation time. Reports two devices set to the same addressTwo independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuitsSelectable strobe synchronization for System Sensor, Wheelock, and Gentex devicesNotification Appliance Circuit End of Line resistor matchingFour programmable function keys for ease of maintenanceTwo programmable relays and one fixed trouble relayBuilt-in ProgrammerIntegral 80-character LCD display with backlightingReal-time clock/calendar with automatic daylight savings controlHistory file with 1,000 event capacityAddressable sounder baseMulti-criteria detector (smoke, heat, CO) with programmable responseControl module delay timerAutomatic detector sensitivity testing (NFPA 72 compliant)Point trouble identificationWaterflow selection per module pointAlarm verification selection per detector pointMaintenance alert warns when smoke detector dust accumulation is excessiveOne-person audible or silent walktest with walktest log & printoutSystem alarm verification selection per detector pointPAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)Up to 16 ANN-BUS annunciators- 8 per each ANN-BusRemote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciatorUpload/Download of program and data via USB with optional FSTools Programming Utility
