The TempAlert MTA-2 is a reliable and economical temperature-monitoring device that can be used in residential or commercial applications. Integrate into a security panel, set the desired temperature parameters, and have peace of mind that you will be notified of an incident where corrective action is needed. Alarm contacts may not function outside of the alarm use range. Non-condensing environments only. Do NOT put device into cooler/freezer environments. Use an EnviroAlert or EnviroAlert Professional with a wired sensor for cooler/freezer environments.
Main Features
No power required to operate and connects to most hard wire or wireless alarm systems.
Separate output for high and low alarm signals.
Do not place the TempAlert MTA-2 into cooler/freezer environments. Non-condensing environments only.
Normally Open (N.O.) device with gold plated dry contact outputs (not for high voltage use)
Contact output rating of 12V DC at 50mA
Unit operating range of (1) for alarm use of 20 to 110 F (-6.7 to +43.3 C) and (2) for display use of 0 to 120 F (-17.8 to +48.9 C)
Minimum temperature span of 10 F (5.6 C)
Temperature accuracy of ±3.0 F (±1.7 C)
Temperature response time of TC = 14 minutes.
Dimensions of 4.5" x 3.25" x 1.0" (11.4cm x 8.3cm x 2.5cm)
General Information
Name: Winland M-001-0151 Winland MTA-2 Mechanical Temperature Alert with Dual High and Low Output
Category: Winland Electronics, Intrusion, Environmental Sensors, Temperature Sensors
UPC Code: 082075011518
Country of Origin: United States. Country of origin is subject to change.
