Eaton Crouse-Hinds series Chico A sealing compound, 115 Cu In
Crouse-Hinds series Chico sealing compounds and fiber are used to form a seal around each electrical conductor and between them, and inside of the sealing fitting to restrict the passage of gases, vapors or flames through the sealing fitting. Chico A sealing compound is a water soluble powder that can be easily mixed and poured. The dense compound expands slightly when hardening and bonds to inner walls of sealing fittings. Chico A-P Intrapak is packaged in a two compartment plastic pouch with precise amount of water for mixing. No measuring is required, speeding up the installation process. Chico X fiber forms a dam between the integral bushing of the sealing fitting and the end of the conduit and around the electrical conductors entering the hub. It is a mineral wool that packs easily, forming around each conductor. Chico A, Chico A-P and Chico X are approved for use in Class I, Division 1, Groups A, B, C, D and Class II, Division 1, Groups E, F, G hazardous areas.
Product Specification
Water-soluble powder that is easy to mix and pour.
Expands slightly when hardening, forming a strong bond with sealing fitting walls.
Pre-measured water in Chico A-P Intrapak speeds up the installation process.
Chico X fiber easily packs around conductors, forming a dam in sealing fittings.
Approved for use in Class I, Division 1, Groups A, B, C, D, and Class II, Division 1, Groups E, F, G hazardous areas.
